One type of water heater that is common in most home properties is run by electricity. Electric water heaters are typically utilised since a huge percentage of households around the world rely heavily on electricity. While it can also be convenient to install an electric water heater on any home property, its high utility costs and energy consumption in the long run often discourage homeowners from buying it.

Fortunately, there are some ways on how to save money and energy with an electric water heater. 

Turn Down Thermostat

If the temperature of your thermostat is currently set at above 50 degrees Celsius, then you must turn it down a little bit. Believe it or not, turning down the temperatures of your electric water heater can still grant you your needed hot water supply while saving some money and energy. For every 10-degree reduction that you will do, it can already provide you around 3 to 5 percent of savings on your electric bill.

Consume Less Hot Water

The idea of having a constant supply of hot water does not necessarily mean that you can just consume it anytime you want. Just like any resource in your home, you must still use your hot water wisely. Aside from moderating your hot water consumption, you can install some fixtures that can help you save hot water. Installing low-flow showerheads, faucet aerators, heat traps, or even a timer on your water heater can help you decrease hot water consumption by as much as 60%. Setting appliances that rely heavily on hot water to their respective economy modes can likewise reduce hot water consumption.

Drain Tank Sediment

Electric water heaters with tanks are typically maximised by homes with a lot of people. They utilise this type of water heaters since their tanks can hold a huge volume of water for later use. While tanks can really bring convenience to households, the repetitive storage of hot water can cause accumulation of sediment on their bottom part. This accumulation will then affect the overall efficiency of the electric water heaters.

As a solution, you must drain the tank quarterly. When draining the tank, you must turn off the water and the power supply to the tank. Then, connect a water hose to the spigot at the base of the tank and point it to the nearby drain. Once pointed, you must lift the pressure-relief valve and turn on the spigot so that the water from the hose will flow down the drain and remove any sediment.

Insulate Water Heater Parts

Another way to save money and energy with your water heater is to insulate it and some of the connected parts. The water pipes that are connected to your electric water heater must be insulated so that they can transfer water to the taps without losing its hot or warm temperatures. As for your water heater itself, you must also insulate it by wrapping the system with an insulated blanket. Insulating the pipes and the water heater can significantly cut heat loss by around 25 to 45% and save more than 4% on the electric bill.

For more helpful tips on saving money and energy with your electric water heater, feel free to contact us at Bexley Hot Water Repairs.

To date, various companies manufacture and produce hot water heater systems. One of these companies is Quantum Energy Technologies. It is an Australian company that offers heat pumps and hot water heater systems to consumers for almost 3 decades. With years of extensive research and experiments, the company has been known to have patented a technology that permits its tanks to still work as low as -10°C without the need for any backup element or assistance.

Main Features of Quantum Hot Water Heater Systems

Quantum Energy Technologies offer hot water heater systems that can be used in either commercial or industrial building. The company also has hot water heater systems that are intended for residential buildings and home properties, making Quantum Energy Technologies versatile as it can offer a wide variety of products across all types of properties and applications.

Most hot water heater systems from Quantum Energy Technologies boast several key features that are very useful for different properties. Some of these features include:

• Matches Climates: Quantum hot water heater systems can easily operate in both warm and cold climates. Additionally, they can also run during the day, with or without sun, and in the night.
• Boosts Efficiency: Quantum hot water heater systems that are run by gas have a performance efficiency of up to 95%. Alternatively, systems that are run by electricity and heat pumps have a massive performance efficiency of 100% and 350%, respectively. And unlike other brands, the systems from Quantum can be more efficient if the ambient temperatures are higher.
• Saves Energy: Quantum hot water heater systems are known for their energy efficiency and low running costs. Compared to other brands, systems from Quantum Energy Technologies can reduce overall energy consumption by a whopping 75%.
• Eases Installation: Quantum hot water heater systems can be installed easily, which is closely similar to the way electric systems are installed. These systems do not require additional expenses for roof panels and other roof features just to protect them from weather elements.

Functions of Quantum Hot Water Heater Systems

The functions of Quantum hot water heater systems are closely similar to systems from other brands. They can heat water to the preferred temperature with the help of their internal components. Depending on the needed water capacity of a property, these systems can easily supply and store water for later use through the presence of a durable storage tank.

Quantum hot water heater systems are likewise comprised of in-house developed software that can conveniently calculate peak loads, daily hot water usage, and any heat losses that are related to ring-mains systems. Additionally, this software can also calculate energy usage reduction, greenhouse gas emissions reduction, and payback period.

For the property owners to get the needed hot water, they must buy and install a water heater. Water heaters can be grouped according to their energy source. Some of them can be run by electricity, while others would depend on natural gas. Aside from their primary energy source, water heaters may also be grouped according to the presence of a tank, which is a defining factor that can affect their effectiveness and functionality. However, one specific type of water heater that is now becoming popular today is known as the hybrid water heaters.

Basic Principles of Hybrid Water Heaters

The popularity of hybrid water heaters is due to their capability of reducing energy consumption by about 60% without compromising their overall functionality. Unlike a standard water heater that has a tank, hybrid water heaters do not have to run regularly. But if they are truly needed, they would automatically pump and fill up the tank with hot water so that the water supply will not deplete easily.

With hybrid water heaters, they would take in warm air and absorb its heat to increase water temperatures. The evaporator coil of these water heaters, which is comprised of refrigerant, initiates the process of heat absorption from the air. The heat exchanger of the water heaters then enables the heating of water to the selected temperature before transferring it to the tank. Once the heated water is stored in the tank, it can now be distributed to taps and showers.

Optimum Setup for Hybrid Water Heaters

As mentioned, hybrid water heaters are intended to get heat from their surroundings and process it to get the needed hot water. And so, for them to run optimally, one of the basic requirements for these water heaters is to install them on places that constantly experience a warm climate. Places that are getting temperatures around 5° C to 35° C can instantly enjoy the benefits of these water heaters. Naturally cold areas will not be able to fully experience the benefits of hybrid water heaters.

Another requirement that must be remembered when installing hybrid water heaters is their installation area. Since the heat pump of these water heaters is located on the top, they must have enough space to conveniently capture heat from the air. The area where these heaters should be installed must have a clearance of 7 feet from floor to ceiling. A warm space of around 1,000 cubic feet must also be present so that the heaters can easily obtain enough heat and discard unwarranted products.

To make hybrid water heaters work, they must also be connected to a stable source of electricity. A high-voltage circuit and breaker must be both installed so that the water heaters can operate efficiently and safely. Homes that are connected to a gas supply can still install these water heaters. However, they would have to spend a lot of money just to alter crucial fittings and components. Knowing these basic things about hybrid water heaters can help you decide if they are great for you. Installing them can be easy. However, you should truly consider the condition of your property so that they can work effectively.

Advantages of Hot Water Systems

Properties with hot water systems can obtain numerous helpful advantages. For one, these systems can effectively provide the needed hot water for cleaning chores, showers, and sanitation in a property. Aside from providing high-quality heating of water for various applications, these systems can also help properties conserve water. Tankless systems can significantly save water since they do not have to spend a certain volume of water just to convert and provide the needed hot water supply. Hot water systems can also conserve energy, especially those that can utilise renewable energy sources.

Importance of Hot Water Repairs

Without regular cleaning and proper maintenance, the hot water system of a property might deteriorate and get damaged in the long run. And once the system starts to fail, the occupants of a property might start to experience some irregularities and inconsistencies on their water supply, as well as other physical problems that they might encounter with their hot water system.

If you are now experiencing some issues with your hot water system, then you may want to have it repaired immediately. Emergency hot water system repairs are important since they can provide you a high-quality and consistent supply of hot water. Repairs and maintenance of this system can instantly turn it into brand new again since any accumulation of minerals, dirt, and other elements are removed. Parts and components that are already faulty will also be replaced by professionals.

Another importance of hot water repairs is that they can significantly lower water and energy expenses. Faulty hot water systems tend to force themselves in operating optimally. And in return, they consume much more water and energy just to meet the needs of a property. Repairing faulty systems can easily decrease utility bills, as well as wasted resources. 

Hot Water Repairs During COVID-19

While emergency hot water repairs are truly important for properties, the current COVID-19 pandemic makes it somehow difficult for professionals to do some immediate repairs and maintenance. Fortunately, authorities have allowed the execution of these services as long as safety guidelines and protocols are followed and implemented by both property members and repair professionals.

If you will be contacting professionals to do some hot water repairs, you must strictly follow social distancing once they have arrived. The distance between you and the repair professionals must be at least 1.5 metres. You must also make sure that no-contact greeting and interaction will be implemented. At this point in the pandemic, repair professionals are now expected to wear masks, gloves, eyewear, and others to effectively protect themselves from the virus while conducting their work. As for you and other household members, you must all wear a mask for your own protection.

Any discussions about the possible issues of your hot water system must already be discussed over the phone or via e-mail to limit communication in person. Once these professionals have left your vicinity, you must now clean and sanitise your whole place with an appropriate disinfectant solution. Surfaces that they may have been touched must be cleaned and disinfected as well. For more information about emergency hot water repairs in Sydney, feel free to contact us at Bexley Hot Water Repairs.

One of the most prominent issues with gas water heaters is gas leaks. These leaks happen when the water heater has a faulty gas line. They may also happen if the water heater is fitted or maintained poorly. To determine if your gas water heater is leaking gas, then here are some signs that you must look out for.

Rotten Egg Smell

A prominent sign of a gas leak in gas water heaters is the presence of rotten egg or sulphur smell. A gas leak can be difficult to determine if you are just looking for it as gas does not have any colour. Naturally, gas does not also have any odour. However, as a precaution, companies would add a harmless chemical that provides gas with a distinct rotten egg odour. If you smell this type of odour, then it is the best time for you to act and have your gas water heater checked.

Hissing Noise

Aside from its bad odour, gas leaks can also be determined through the presence of hissing sounds. When a hissing or rustling sound of air leaks out of your gas water heater, then it is a clear sign that your system just lets the gas out freely. Faulty gas lines and components are typically the main culprits behind the existence of both the rotten egg odour and the hissing noise. Once this specific noise is detected, safety precautions must be followed immediately before consulting with professionals.

Dead Vegetation

Another sign that can help detect leaking gas from the gas water heater is the death of vegetation of plants around the said water heater. Browned, wilted, or dead vegetation would typically mean that there are gas leaks around the affected area. Constant water pool bubbling on some areas around the property also signifies that the gas is leaking from the gas water heater.

Bubbles Formation

One way to determine if your gas water heater has gas leaks is to perform a bubble or soap test. To conduct the test, you must mix dish soap and water together. Then, soak or dip the cloth rug on the soap-water solution and wipe it down on the water heater, gas pipes, and other areas that you suspect have gas leaks. The formation of bubbles on soaped areas means that the gas is leaking from those areas. Once gas leaks are detected, you must open the windows and doors and call for professional help. If you have successfully determined and detected that there is gas leaking your gas water heater, then call us now at Bexley Hot Water for professional repairs and maintenance.

Daily household chores and other activities are always possible with a fully functional hot water system. However, if the system starts to manifest some abnormalities and component failure, it can typically bring inconvenience to the whole family. And while some hot water systems can still be fixed, others just do not work the same as they used to. So, does repairing your hot water system is still possible? Or do you need to replace it immediately? Here are some key indicators that tell you to do the latter.

Presence of Corrosion

The materials used for most hot water systems can resist corrosion. However, due to a long time of use and other external components, corrosion on some parts of your system may start to develop. Corroding components and chassis of your system are already permanent, which means that the corrosion process will just continue until all parts are consumed by rust. Hot water system corrosion can also affect the water output quality. With this process, discolouration and the presence of small particles in your water can be seen from your taps and showers, which is not safe for day-to-day consumption.

Leaking Water Supply

Another clear sign of a faulty hot water system is the leaking of water from the system. One of the reasons behind this problem is that the tank has too much pressure, which happens when the water temperature is set too high. Too much tank pressure can also happen when the incoming water supply is set at very high pressure. Some other reasons behind water leakage include loose drain valve, presence of cracks, loose fixtures, improper drainage, and old age. The continuous leaking of water can cause a significant increase in your water bills every month and prompt hot water system corrosion.

Strange Weird Noises

Appliances and pieces of equipment typically produce strange, weird noises if there is something wrong with their components. This situation also happens with hot water systems. There will be instances where you will suddenly hear weird noises whenever you use the system. However, as time passes by, these weird noises will still be evident even if you have turned your tap off. These noises are always a good indicator that the system is nearing the end of its service life. Repairs can still fix these noises, but they can always come back in a short time.

Aging of the System

One common reason behind hot water system replacements is that the system has already reached its end. A hot water system that has been working for 10 years or more is already a very long time, considering that it has gone through different repairs and maintenance. Its parts may have already worn or damaged over time, which also means that the efficiency of the system has significantly degraded too. When replacing your aging hot water system, this would normally be a good time to find a system that has better features and can meet the current hot water needs and demands of the household. Knowing these indicators will help you assess if you need to replace your hot water system fully or you just need some repairs. If you want some help in deciding the fate of your hot water system, feel free to contact us at Bexley Hot Water Repairs.

This new type of hot water system is known as continuous hot water systems. This type of hot water system does not need any tank to supply the needed hot water of a household. While traditional hot water systems can also supply hot water to households, many users have experienced some sort of delay when they sometimes need hot water. This delay can be caused by numerous reasons. One of them is the entry of cold water to the tank, which must be heated first before allowing the water supply to flow again.

The Principles behind Continuous Hot Water System

A continuous hot water system can immediately detect if there is a need for hot water through the help of a flow sensor. As long as the tap is open, a continuous hot water system will readily supply the needed water without disruptions. When you close the tap, the hot water system will also go off automatically.

The water heating process of most continuous hot water systems is technically the same. The only difference between them is their main energy source. Systems that rely on gas consume the energy from gas to ignite an internal burner, which is responsible for the heating of needed water supply. Alternatively, systems that are powered by electricity utilise heating elements to conduct the same water heating process. All these heating elements will start working whenever the flow sensor is activated.

Since they are tankless, all types of continuous hot water systems take cold water from the pipeline before they process it with whatever heating element present on the system. The absence of tanks also enables a continuous hot water system to prevent unnecessary heat loss.

Some Advantages of Continuous Hot Water System

Aside from obtaining an endless supply of hot water, continuous hot water systems can also save a significant amount of space. Conventional hot water systems are known to occupy huge space in certain parts of the home, which can somehow destroy the overall appearance of a home. Fortunately, continuous hot water systems do not have any bulky tank that can ruin the aesthetic appeal of your home. Instead, they come in small and compact form factor that makes them compatible with any given spaces.

Another great thing about continuous hot water systems is that they produce a cleaner water supply. The problem with the use of tanks is that they tend to deteriorate over time. Once their metallic parts start to corrode, your water supply will be now susceptible to dirty elements. Even the build-up of dirt and minerals on these tanks can affect the quality of your water supply. Continuous hot water systems do not have this kind of problem, assuring you a much cleaner hot water supply in the long run.

Since continuous hot water systems do not have to store huge volumes of water, then any possibility of heat loss is altogether eliminated. Tank storage hot water systems require energy just to maintain the temperature of stored water even if the water is not yet needed. On the contrary, new types of hot water systems will only use the energy once the tap is open.

Understanding the water heating process of a continuous hot water system can help you decide if this system is for you. If you want to have your own continuous hot water system, feel free to order from us at Bexley Hot Water Repairs.

To generate adequate heat, the concept of solar heating is applied to a specific number of products. Historically, solar heating can be likened to the principles of a sunroom, a room where solar energy is efficiently captured and stored. This specific room permits a huge amount of daylight to enter the room. It may even feature a passive solar building design that helps keep it warm and illuminated.

Advantages of Solar Heating

More and more households are now heading towards solar heating. Different types of solar heating panels or systems are now becoming popular due to the benefits that they bring to residential and even commercial buildings.

First, solar heating can significantly cut monthly energy and heating expenses by a tremendous percentage. And since solar heating relies primarily on the power of the sun, you can certainly gain your desired energy, heat, and light without any additional expenses. Additionally, solar heating can help reduce carbon dioxide emissions since you do not have to consume energy from fossil fuels and natural gas. Lastly, solar heating can regulate the temperature of your property without any problems and difficulties.

Solar Water Heating Systems

Solar water heating is one of the few ways of generating heat from the sun. Solar water heating is done through a solar water heating system that has solar collectors which helps in absorbing solar radiation and converting it into heat. The heat energy from these collectors is then processed and transferred to either a non-toxic glycol antifreeze or water. Subsequently, the warm fluid passes through a heat exchanger or a water storage tank.

To date, there are three types of liquid-based solar water heating systems.

1. Radiant Floor Systems: The heated liquid from this type of system moves through several pipes that are attached to a thin concrete floor. The same liquid will then radiate heat into your living quarters. Floors that are filled with tiles can hugely benefit from this system. Alternatively, floors that have thick carpeting or mats may expect poor performance from this system.
2. Hot-water Baseboards: Hot-water baseboards are usually comprised of copper pipes that pump hot water and consequently transfer the heat from the water to the room. This type of solar water heating system is typically installed at the baseboard or a point close to the ground. The location of this system helps in the even distribution of the heat within your home space.  
3. Central Forced-air Systems: The addition of a heating coil or liquid-to-air heat exchanger in the air-return duct of a room allows the conversion of a liquid heating system into a forced-air heating system. Whenever the duct pulls the air from a room, the heat exchanger will then heat it with the help of the solar-heated liquid. Take note that the heating coil must have the right size to allow the transfer of heat to the room. This system works best for central heating in homes.

The processes behind solar heating and the varieties available for solar water heating systems can clearly help you save a tremendous amount of energy. To know more about solar water heating systems, then feel free to give us a call at Bexley Hot Water Repairs.

To make them effective and efficient, heating systems must undergo regular maintenance. A fully functional heating system can save a tremendous amount of energy and money. Maintaining a heating system can also increase comfort, enhance the air quality of a room, prolong equipment service life, improve safety, and reduces the cost of repairs.

Emergency Services May Still Be Required

Despite regular maintenance, a heating system may still need emergency services due to unexpected circumstances. For one, emergency services for a non-functional heating system must be done immediately if the outside temperature becomes extremely cold. Without any alternative devices or equipment, the safety of your family or employees could be at risk. Blowing out of cold air is also a clear sign that your heating system needs some help.

Strange noises like buzzing or popping sound may be a sign that your heating system needs some repairs. One possible cause behind these strange sounds is the presence of a serious electrical problem within your system, which can also pose a threat to the safety of the whole facility. Another sign of an electrical issue is the presence of a burning smell. When faced with these signs, cutting off the power to your heating system must be done right away while waiting for the emergency repairs.

Before You Contact Your Repair Services

Companies that offer emergency repairs are available all the time. They can offer repairs in the middle of the night. However, not all heating system problems require immediate repairs all the time. Before calling on your repair service provider, you must know how to deal with some problems with your heating system first.

Before you contact emergency repair services, you must check your thermostat first to make sure that the control is all set to heating and working properly. Additionally, you must check your electrical panel thoroughly before turning your heating system on. You should also make sure that the switches of your outdoor main power unit and indoor unit are switched on to avoid unnecessary expenses. 

The Convenience of 24/7 Schedule for Customers

But if you certainly need emergency repairs, then numerous service providers readily offer a 24/7 schedule for customers. Even outside normal business hours, these service providers can heed to your request even if it is in the middle of the night or during a Sunday. After all, they prioritise the safety and comfort of property owners who need to get their heating systems fixed right away. 

The presence of 24/7 repair services for customers also helps in prolonging the service life of the heating system. Repair services can easily fix the heating system before it gets totally damaged. These services also help customers ease their mind since they know that their equipment is safe and can be easily attended anytime. To acquire a service provider that can fix your heating system during emergencies, then contact us now at Bexley Hot Water. Like many other household conveniences, a good supply of hot water is only truly appreciated when it stops and if it stops when you are in the shower, this realisation can arrive quite abruptly. Fortunately for you when Bexley Hot Water Repairs is around, it will not happen.

But since heat pumps are used most of the time, there is a high chance that these heat pumps might unexpectedly reach the end of their service life in a short time. With their regular use, heat pumps are believed to be more prone to experience wear and tear compared to other appliances. To know if your heat pump now requires repairs or replacement, then you must look for the following signs. 

Inconsistent Temperature

One of the most common problems with heat pumps is that they do not provide you the optimum temperature. These appliances may still produce regular air level, but its temperature does not follow your indicated temperature. For instance, you may experience some cool air even if you set it to a warm setting and vice versa. Heat pumps with this kind of problem may have damaged compressor or other components.  

Weakened or No Air Flow

Heat pumps are intended to blow out air from the vents. Setting your thermostat to a reasonable temperature must be able to produce optimal airflow to your home. However, if there is little or no warm air coming out of your unit, then your heat pump might have damaged internal components. The same with the previous problem, any signs of weakened to no airflow means that your compressor or even your filter have some serious issues. 

Strange Noises or Odours

Heat pumps are normally intended to operate almost silently without emitting odd odours. However, if your heat pump starts to emit screeching, grinding, grating, rattling, buzzing, or ticking sound, then some of its components might require some repairs, cleaning, or even replacements. These maintenance works are also required if any unusual odours are being emitted by your heat pump. After all, you do not want your family to inhale bad odour and harmful elements in your home. 

Leaks and Excess Moisture

Any small amount of condensation or water dripping on the outside of your heat pump is normal. But if you notice some random moisture development in your home or a sudden increase in condensation, then it is a clear sign that your unit has a problem. With leaking problems, professionals must be the only one who can replace your heat pump since some units may spring refrigerant leaks. They will also identify the source of the leak for them to assess the most cost-effective course of action.

Spike on Energy Bills

One great sign of a bad heat pump can be reflected in your energy bill. Even if you use your heat pump at an optimal level, your energy consumption will still be strangely high especially if your heat pump has damaged or unmaintained components. Any energy consumption changes with your heat pump might have to do with its low refrigerant charge, refrigerant overcharge, dirty air filter, and many more. A faulty installation of heat pumps can also contribute to an electric bill problem.

Knowing the reasons behind having a bad heat pump can help you mitigate any problems that may occur in the long run. For more information about heat pumps, just contact us now at Bexley Hot Water Repairs.