Understanding Hybrid Water Heaters

August 28, 2020

Water heating is a process that uses a heat source to increase the temperature of the water above its normal room temperature. The whole process of water heating is utilised by households and other properties as it can help them obtain the needed hot water for their daily tasks such as cooking food, washing clothes, taking a bath, or simply warming up a particular room or space.

For the property owners to get the needed hot water, they must buy and install a water heater. Water heaters can be grouped according to their energy source. Some of them can be run by electricity, while others would depend on natural gas. Aside from their primary energy source, water heaters may also be grouped according to the presence of a tank, which is a defining factor that can affect their effectiveness and functionality. However, one specific type of water heater that is now becoming popular today is known as the hybrid water heaters.

Basic Principles of Hybrid Water Heaters

The popularity of hybrid water heaters is due to their capability of reducing energy consumption by about 60% without compromising their overall functionality. Unlike a standard water heater that has a tank, hybrid water heaters do not have to run regularly. But if they are truly needed, they would automatically pump and fill up the tank with hot water so that the water supply will not deplete easily.

With hybrid water heaters, they would take in warm air and absorb its heat to increase water temperatures. The evaporator coil of these water heaters, which is comprised of refrigerant, initiates the process of heat absorption from the air. The heat exchanger of the water heaters then enables the heating of water to the selected temperature before transferring it to the tank. Once the heated water is stored in the tank, it can now be distributed to taps and showers.

Optimum Setup for Hybrid Water Heaters

As mentioned, hybrid water heaters are intended to get heat from their surroundings and process it to get the needed hot water. And so, for them to run optimally, one of the basic requirements for these water heaters is to install them on places that constantly experience a warm climate. Places that are getting temperatures around 5° C to 35° C can instantly enjoy the benefits of these water heaters. Naturally cold areas will not be able to fully experience the benefits of hybrid water heaters.

Another requirement that must be remembered when installing hybrid water heaters is their installation area. Since the heat pump of these water heaters is located on the top, they must have enough space to conveniently capture heat from the air. The area where these heaters should be installed must have a clearance of 7 feet from floor to ceiling. A warm space of around 1,000 cubic feet must also be present so that the heaters can easily obtain enough heat and discard unwarranted products.

To make hybrid water heaters work, they must also be connected to a stable source of electricity. A high-voltage circuit and breaker must be both installed so that the water heaters can operate efficiently and safely. Homes that are connected to a gas supply can still install these water heaters. However, they would have to spend a lot of money just to alter crucial fittings and components. Knowing these basic things about hybrid water heaters can help you decide if they are great for you. Installing them can be easy. However, you should truly consider the condition of your property so that they can work effectively.

Optimized by NetwizardSEO.com.au